How To Prepare And Login App - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
----End

9.2.2 How to Prepare and Login App

Prerequisites
App operating environment requirements:




Procedure
Step 1 Download and obtain the app installation package using any of the following three methods:

Issue 07 (2020-03-16)
Figure 9-17 Installing a WiFi converter
The WiFi antenna should be installed on the planned position by using the magnet.
The mobile device must run Android 4.0 or later and is not root operation system (the
operating system is not flashed).
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800 as well as the user name and password
used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800 is prepared,
and the PC has connected to port WAN_1 on the ECC800.
Log in to HUAWEI App Store (http://a.vmall.com/) or Google Play, search for
FusionModule, and tap Download.
− Outside China: Tap the Google play app and search for FusionModule.
Copyright © Huawei Technologies Co., Ltd.
9 FAQ
212