Smart Eth Gateway - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Indicators
Table 3-15
Table 3-15 Indicator description
Indicator
PWR
RUN
ALM

3.2.2 Smart ETH Gateway

A smart ETH gateway allows the extension of the 53.5 V DC power supply and FE
communication for the ECC800 and can be flexibly deployed in a smart module.
Issue 07 (2020-03-16)
lists the structural specifications for the rack environment unit.
Color Name
Green Power input
status
indicator
Green Module
running
status
indicator
Red Alarm
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power input is normal.
Off There is no power input.
Off The power is abnormal or
the board program is
loading.
Blinking at The software runs properly
long (the indicator blinks at 0.5
intervals Hz, on for 1s and then off
for 1s).
Blinking at POE communication fails
short (the indicator blinks at 4 Hz,
intervals
on for 0.125s and then off
for 0.125s).
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on A system failure alarm is
generated.
Off No system alarm is
generated.
3 Device Description
24