Commissioning Ipc6325 Camera (Sd Card Configured) - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
2.
3.
4.
Step 2 Add a camera. For details, see
1.
2.
3.
4.
5.
6.
Step 3 Set recording parameters. For details, see
delivered with the VCN500.
----End

5.8.4 Commissioning IPC6325 Camera (SD Card Configured)

Context
If the VCN is not configured and an SD card is chosen, perform the following procedure.
Procedure
Step 1 Log in to the camera WebUI.
1.
2.
Step 2 For details about how to commission cameras and set parameters for them, see the document
delivered or click
1.
2.
Issue 07 (2020-03-16)
Double-click HW_IVS_Client.exe, adopt the default installation mode, and wait until
the installation is complete.
Double-click the client program and on the login page, enter the user name Admin and
preset password Change_Me, and set Server address to the actual service IP address
(VCN500 IP address) and Port to 9900.
Click Log In to access the client home page.
After the first login, change the password in time to ensure account security and prevent unauthorized
network attacks, such as data tampering. Huawei will not be liable for any security issues caused by your
failure to change the preset password in time or password loss after changing.
The IPC6325 camera is driven by the HWSDK protocol.
In Quick Setup area on the C/S client home page, double-click Add Camera.
Set the searching criteria for cameras and click Next after setting.
Search for and verify the camera. Then select the camera and click Next.
Preview live video images, click the camera in the camera list on the left, and adjust
camera parameters to optimize the image effect. Then click Next.
(Optional) Group the cameras and click Next after grouping.
Click Finish to finish adding a camera.
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
here to download the document.
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
Set IP address, Subnet mask, and Gateway IP address to the planned values.
Copyright © Huawei Technologies Co., Ltd.
Adding HWSDK- and ONVIF- Compliant
Verifying Platform Recording
5 Power-On Commissioning
Cameras.
or the documents
150