Huawei ECC800 User Manual page 136

ECC800 Data Center Controller
User Manual
1.
2.
3.
Step 2 Set the access permissions for a user.
1.
2.
3.
Issue 07 (2020-03-16)
Choose System Settings > Access User Management to enter the access user
information page. The system supports the management of various access permissions
through the access card, password, and fingerprint.
Click Add to enter the page for adding users. On the Basic Info tab page, enter User
name.
− Password: Enter the password for the new user.
− Card number: The card number can be recorded directly or by swiping the card.
 Record directly: Type the access card number in the text box.
 Record by swiping the card: Click Swipe Card and place the card on the
access control device. The card number is automatically recorded.
− Fingerprint: On the Fingerprint tab, select Finger Print for Fingerprint reader
and click Collect. On the Please collect fingerprint page, click OK. Then put your
finger on the fingerprint reader to collect the fingerprint after hearing the voice
prompt. After you hear a beep sound, move your finger away and collect the
fingerprint again.
A maximum of three fingerprints from different fingers can be recorded.
Click OK to complete the access user adding task.
Figure 5-11 Adding access users
Choose System Settings > Access Right Management to display the access permission
setting page. On the page, you can modify and delete user access permissions and set
access permissions for new users.
Click Add to enter the page for adding permissions.
Click and select the user whose access permissions need to be set, and set the Door,
Authorization mode, Cabinet lock, and the permission validity period.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
127