Huawei ECC800 User Manual page 21

ECC800 Data Center Controller
User Manual


Issue 07 (2020-03-16)
− Supports the function of transparent transmission over the RS485 port, so that
southbound components can communicate with the NetEco after accessing the
ECC800.
− Allows you to modify device performance parameters and query historical
performance data.
Simple
− Supports local WiFi hotspots. After you install the WiFi module at the USB port on
the ECC, you can connect to the ECC using the app on the mobile phone or tablet
computer to view the basic information about the smart module, such as layout,
resources, energy efficiency, environment, and alarms. This increases usability.
− Supports query of device information in real time using the pad app or mobile
phone app, facilitating operation and maintenance.
Supports connection of monitoring devices to the POE bus in plug-and-play mode
−
for auto-discovery and auto-registration requiring no configuration. This feature
enables fast delivery and higher maintainability.
Reliable
Supports intelligent linkage management which allows customization of linkage
−
logic, achieving intelligent operation and maintenance.
Supports dual power inputs, providing high reliability.
−
Supports intelligent battery monitoring management, which allows monitoring of
−
individual cell voltage and internal resistance for discovery of failed cells.
− Supports a POE ring network, reducing networking fault points and providing high
reliability.
Supports interworking with the NetEco, supports the SNMP protocol, allowing
−
centralized management in various scenarios.
Copyright © Huawei Technologies Co., Ltd.
2 Overview
12