How Can I Install A Network Security Certificate - Huawei ECC500 User Manual

ECC500
User Manual
Procedure
Step 1 Open the Internet Explorer, choose Tools > Internet Options.
Step 2 Click Advanced, and select Use TLS1.1 and Use TLS1.2.
Step 3 Click Connections, and select LAN settings.
Step 4 Deselect Use a proxy server for your LAN in the Proxy server area.
Step 5 Click OK.
----End
Follow-up Procedure
If the ECC500 collector still cannot be logged in on the WebUI, contact Huawei technical
support.

7.3 How Can I Install a Network Security Certificate?

Prerequisites



Context


Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose System Settings > Site Settings.
Step 3 Click Select a file behind Select network security certificate.
Step 4 Select the network security certificate to be imported from the PC and click Upload.
Step 5 Click Select a file behind Select the network security certificate key to be uploaded.
Step 6 Select the network security certificate key to be imported from the PC and click Upload.
Step 7 (Optional) If the network security certificate is encrypted, select If an encrypted private key
is imported, enter the password for decryption., and enter Key password and Confirm
key password.
Issue 04 (2019-12-20)
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
You have copied a network security certificate and its key you obtained to the PC.
Install a network security certificate if a security certificate problem message is
displayed when you attempt to log in to the ECC500 WebUI.
You need to apply to an organization authorized by the customer for a network security
certificate and its key with the ECC500 IP address or domain name. This section
describes how to import the certificate and key.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
67