Huawei ECC800 User Manual page 25

ECC800 Data Center Controller
User Manual
Item
USB
Button
Table 3-4 ECC800 RF parameters
Model Name
ECC800
Indicators
Table 3-5 Indicators on the ECC800 main control module
Indicator
RUN
Issue 07 (2020-03-16)
Specifications
(GSM) communication. A standard SIM card slot is provided.
NOTE
The prerequisite for using a SIM card is that the site has signal coverage.
 After installing the WiFi module, connect the WiFi module to
the ECC using the app on the mobile phone or tablet computer
to view the basic information about the smart module, such as
layout, resources, energy efficiency, environment, and alarms.
 Insert a USB flash drive to export historical data, device data,
fault information, and configuration files; import/export the
device configuration data and historical data.
 SW: wireless network pairing button
 Default: restores the default IP address
Specifications
RF_Z Operation Frequency
RF_Z EIRP (max.)
3G/4G Operation
Frequency
3G/4G EIRP (max.)
Software version
Color Name
Green Running status
indicator
Copyright © Huawei Technologies Co., Ltd.
2405 MHz–2480 MHz
5 dBm
WCDMA BAND: 850 MHz–2100
MHz
GSM: 850 MHz–1900 MHz
36 dBm
V100
Status Description
Steady on The power supply is normal, the
program is being loaded, or WiFi
WPS is pairing.
Off The power supply is abnormal.
Blinking at The software runs properly (the
long indicator blinks at 0.5 Hz, on for
intervals
1s and then off for 1s) or the
ECC800 registers with the
NetEco successfully.
Blinking at The ECC800 does not register
3 Device Description
16