ABB IRC5 Compact Product Manual page 157

Refitting
The following procedure details how to refit the fieldbus adapter in the computer
unit.
1
2
3
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
4.9 Replacement of fieldbus adapter in the computer unit
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section DANGER - Make sure
that the main power has been switched
off! on page 33.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit please observe the
safety information in section
- The unit is sensitive to ESD! on page 34
Fit the fieldbus adapter in position by
pushing the fieldbus adapter along the
rails on the motherboard.
CAUTION
Push carefully so no pins are damaged.
Make sure that the adapter is pushed
straight onto the rails.
© Copyright 2009-2017 ABB. All rights reserved.
Note/Illustrator
WARNING
A
xx1500001755
A Fieldbus adapter
CAUTION
Always grip the fieldbus adapter around the
edges to avoid damage to the adapter or its
components.
4 Repair
Continued
Continues on next page
157