ABB IRC5 Compact Product Manual page 194

4 Repair
4.19.2 Replacement of system power supply
Continued
7
8
9
Refitting
Use the following procedure to refit the system power supply.
1
Continues on next page
194
Action
Loosen the two lower attachment screws.
Remove the two upper attachment screws.
Pull the power supply unit upwards to release it
from the lower screw heads, and remove it.
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
DANGER - Make sure that the main power has been
switched off! on page 33.
© Copyright 2009-2017 ABB. All rights reserved.
Note/Illustration
A
B
xx0900000570
• A: upper attachment
screws
• B: lower attachment screws
Note/Illustration
Product manual - IRC5 Compact
3HAC047138-001 Revision: G