ABB IRC5 Compact Product Manual page 155

Equipment
AnybusCC DeviceNet slave
fieldbus adapter
Standard toolkit
References
Equipment
Application manual - EtherNet/IP
Anybus Adapter
Application manual - PROFIBUS
Anybus Device
Application manual - PROFINET
Anybus Device
Application manual - DeviceNet
Anybus Slave
Circuit diagram
Removal
The following procedure details how to remove the fieldbus adapter from the
computer unit.
1
2
3
4
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
4.9 Replacement of fieldbus adapter in the computer unit
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety inform-
ation in section DANGER - Make sure that
the main power has been switched off! on
page 33.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before hand-
ling the unit please observe the safety in-
formation in section WARNING - The unit
is sensitive to ESD! on page 34
Remove the cover of the cabinet.
Remove the computer unit.
© Copyright 2009-2017 ABB. All rights reserved.
Art. no. Note
3HAC045973-001 DSQC1004
DeviceNet communication is de-
scribed in Application manu-
al - DeviceNet Anybus Slave.
The contents are described in
section
page
Art. no. Note
3HAC050997-001 Contains information on how to
configure the system for Ether-
net/IP Fieldbus Adapter DSQC 669.
3HAC050965-001 Contains information on how to
configure the system for PROFIB-
US Fieldbus Adapter DSQC 667.
3HAC050968-001 Contains information on how to
configure the system for
PROFINET Fieldbus Adapter
DSQC 688.
3HAC050993-001 Contains information on how to
configure the system for DeviceNet
Fieldbus Adapter DSQC1004.
See Circuit diagrams
on page 217.
Note/Illustration
See Removing the controller cover on
page 89.
See Replacement of computer unit on
page 138.
4 Repair
Continued
Standard toolkit, IRC5 on
207.
Continues on next page
155