ABB IRC5 Compact Product Manual page 182

4 Repair
4.17 Replacement of Remote Service box
Continued
Removal
Use this procedure to remove the Remote Service box.
1
2
3
4
5
6
Continues on next page
182
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
DANGER - Make sure that the main power has been
switched off! on page 33.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the section
WARNING - The unit is sensitive to ESD! on page 34
On the cabinet front, disconnect the connectors
from the Remote Service contacts.
If you have an Ethernet switch, disconnect the
connectors from this as well.
Remove the cover of the cabinet.
Disconnect all connectors from the safety board,
Remote Service box, and Ethernet switch.
Remove the two attachment screws, and push the
safety board unit backwards to release the latches.
© Copyright 2009-2017 ABB. All rights reserved.
Information
A
xx1400002787
A Remote Service contacts
B Ethernet switch contacts
See Opening the IRC5 Compact
controller on page 89.
xx1400001462
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
B