ABB IRC5 Compact Product Manual page 198

4 Repair
4.19.3 Replacement of line filter
Continued
Removal
Use the following procedure to remove the line filter.
1
2
3
4
5
6
Continues on next page
198
Action
DANGER
Before commencing any work inside the
cabinet, please observe the safety in-
formation in section DANGER - Make
sure that the main power has been
switched off! on page 33.
Remove the cover of the cabinet.
Disconnect connector X1 from the sys-
tem power supply.
Disconnect the ground connection.
Disconnect and remove the safety board
unit to be able to access the secondary
side of the line filter.
Disconnect the cables from L1', L2' on
the secondary side of the line filter.
© Copyright 2009-2017 ABB. All rights reserved.
Note/illustration
See Opening the IRC5 Compact controller on
page 89.
xx1400002853
A Connector X1
B Ground connection
See Replacement of Remote Service box on
page 181.
A
xx1400002854
A Line filter connections
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
A
B