ABB IRC5 Compact Product Manual page 129

Removal
Use the following procedure to remove the safety board.
1
2
3
4
5
6
7
Product manual - IRC5 Compact
3HAC047138-001 Revision: G
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
DANGER - Make sure that the main power has
been switched off! on page
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the sec-
tion WARNING - The unit is sensitive to ESD! on
page 34
Remove the cover of the cabinet.
Disconnect all connectors.
Remove the thumb screw and open the protective
cover on the front of the cabinet.
Disconnect three customer connectors.
Remove the four attachment screws to remove the
protection cover.
© Copyright 2009-2017 ABB. All rights reserved.
4.2 Replacement of safety board
Note/illustration
33.
See
controller on page
Make a note of all connections.
xx1400002007
xx1400001379
4 Repair
Continued
Opening the IRC5 Compact
89.
A B
Continues on next page
129