Table of Contents
Advertisement
6. ELECTRICAL ADJUSTMENTS
6.1. SERVICE MODE
SERVO and RF EQ Adjustments Service Menus and Error rate display are activated in the Service
Mode. Service Mode is protected to avoid the miss-operation, to open it the following procedures
are necessary.
6.1.1. 1 Service Mode and Service Menu setting procedures
1. Set the LOCAL/REMOTE SW to LOCAL.
2. Set the DIP SW1 on the rear of the front panel to ON.
3. Press the MENU button on the bottom of the front panel and
confirm that the Service Menu is displayed on the TV
monitor.(Video Out 3)
4. Rotate the search dial and select the item.
5. While holding down the search button, rotate the search dial to
change the adjustment data.
6. The adjustment data is changed.
6.1.2. Displaying the Error Rate
The Error Rate is displayed on the Audio Meter in the Service Mode
1. Place the unit in the Service Mode.
2. Set the error display mode according to the confirmation contents
with following switches.
SW
MODE
FRONT CF SW
2F : The error
rate is not
displayed.
FRONT TC SW
INT : VIDEO
Error rate
4F/8F : The
error rate is
displayed.
EXT : AUDIO
Error rate
80
Advertisement
Chapters
Table of Contents
