Table of Contents
Advertisement
Setup menus
USER menu
<BASIC>
No.
009
010
011
012
013
The underline on the setting item denotes the initial setting.
(continued)
Item
Setting
Superimposed
Superimposed
No.
display
display
CHARA
0000
.
.
H-POS
.
0005
.
.
.
0012
CHARA
525 mode
V-POS
0000
.
.
.
0018
.
.
.
0022
625 mode
0000
.
.
.
0023
.
.
.
0028
CHARA
0000
TYPE
0001
SYS
0000
FORMAT
0001
PB FORMAT
0000
MANUAL
0001
– 48 –
0
This sets the position of the characters on the horizontal plane
.
.
.
for the time code and other super displays output to the
5
VIDEO OUT 3/SERIAL OUT 3 connector.
.
.
.
<Notes>
12
1. When setting this item, the DISPLAY SEL status is output
to VIDEO 3 even if SUPER OFF has been set. However,
when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This sets the position of the characters on the vertical plane
0
for the time code and other super displays output to the
.
.
.
VIDEO OUT 3/SERIAL OUT 3 connector.
18
<Notes>
.
.
.
1. When setting this item, the DISPLAY SEL status is output
to VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has
22
been set. However, when the menu is exited, operation
complies with the SUPER OFF/ON setting.
0
.
.
2. When the DISPLAY SEL setting causes characters to
.
extend beyond the edges of the screen, the setting value is
23
.
.
changed so that the characters are automatically displayed
.
in a position on the screen.
28
WHITE
This selects the display type for the super display output to the
VIDEO OUT 3/SERIAL OUT 3 connector as well as for dis-
W/OUT
plays such as the setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
422
This sets the VTR's recording and playback format.
0: This selects 422 (50M).
411
1: Selects 411 (25M).
<Note>
Editing is not possible in the 411 mode.
This selects the tape playback format.
0: Compliance with the setup menu No. 012 (SYS FORMAT)
AUTO
setting.
1: Compliance with the format in which the tape was
recorded.
<Notes>
•
When an editing mode has been selected, the "MANUAL"
setting is forcibly established for internal operations.
•
There is no automatic setting in the 525/625 mode.
Description
Advertisement
Chapters
Table of Contents
