Panasonic DVC PRO Studio AJ-D950P Service Manual page 72

5.7.22. Cleaner Solenoid Position Adjustment
Tool
Eccentric Driver (VFK0357)
1. Push the Cleaner Solenoid Shaft and confirm the clearance
between Cleaning Arm Unit and Cleaner Base Plate (D) is 0.5 mm
to 0.7 mm.
2. If it is out of specification, loosen 2 screws (A) and move the
cleaner solenoid arrow C direction and adjust the clearance (D) is
in the specification.
3. Push the cleaner solenoid shaft and confirm that the cleaner roller
touches the cylinder. Then confirm that the cleaner roller returns
original position when the shaft is released.
4. Push the Solenoid shaft and rotate the cylinder and confirm that
the cleaner roller is rotated by the cylinder movement.
Cleaner Solenoid Replacement
72