Panasonic DVC PRO Studio AJ-D950P Service Manual page 796

.
3-6-4 Post Height Pre-Adjustment
Mode
EJECT (Power OFF)
Tool
VFK1153, VFK1154 (flange tool)
1. Turns power off and remove the cassette
compartment and set mechanism plate
(VFK153).
2. Place the flange tool (VFK1154) as shown in
the figure and adjust the post height.
3. Adjust the S1 and T1 post height by
VFK1149 and adjust T3 and T4 by
VFK1151.
Name Limit
S5 Post Note 1
S4 Post Note 1
T3 Post
Lower Limit
T4 Post
Lower Limit
Note 1: Rotate CCW one turn from the lower limit.
Post Driver
VFK1149
VFK1149
VFK1151(2.5mm Nut Box)
VFK1151 (2.5mm Nut Box)
Lower Limit
Upper Limit
VFK1154
VFK1154
VFK1154
VFK1153
VFK1154
VFK1153