Table of Contents
Advertisement
3-7-25. MIC Rail Unit Replacement
(Removal of MIC Rail Unit)
1.
Remove the top panel.
2.
Remove the front loading unit.
3.
Remove the bottom panel. (Refer to the bottom
panel removal.)
4.
Remove the connector P17 on the Mech.
Interconnection board.
5.
Remove the MIC Drive REV Spring.
6.
Remove 3 screws and remove the MIC Rail Unit.
(Installation of MIC Rail Unit)
1.
Install a new MIC Rail Unit as reverse order of its
installation.
2.
Confirm that M and L cassette touches MIC Rail
Unit.
MIC Rail Unit Removal
3-7-26. Reel Drive Motor Unit Replacement
(Removal of Reel Drive Motor Unit)
1.
Remove the top panel.
2.
Remove the front loading unit.
3.
Remove the connector P16 on the Mech.
Interconnection board.
4.
Remove 2 screws (A) and remove the Reel drive
sensor board.
5.
Remove 2 screws (B) and remove the Reel Drive
Motor Unit.
(Installation of Reel Drive Motor Unit)
1.
Install a new Reel Drive Motor Unit as reverse order
of its removal.
Reel Drive Motor Unit Removal
Advertisement
Chapters
Table of Contents
