Table of Contents
Advertisement
3-7-4. Adjustments after Cylinder Unit
Replacement
1.
Adjust
following
items
replacement.
Start Mech. Adjustment
Tension Confirmation
. Envelope Waveform Adjustment
. Post Limit Confirmation
A/C Head Confirmation
A/C Head Tilt Confirmation
A/C Head Height Confirmation
A/C Head Azimuth H. Position Confirmation
REV Tape Run Confirmation
CTL REC/PB Output Level Confirmation
PLAY Limit Confirmation
REV/REW/FF ENV• Limit Confirmation
A/C Head,T3•T4 Post Grew
LISTA
LISTA Connection
LISTA Servo Menu Setting
25M Mode LISTA (R/P,PB Head)
50M Mode LISTA (R/P,PB Head)
after
cylinder
unit
REC/PB Envelope Confirmation
Start Elec. Adjustment
PG Shifter Adjustment
. RFEQ Adjustment (PB)
RFEQ Adjustment (REC)
End
Note: For the PG Shifter Adjustment, release hand
from the search button after changing the PG
Shifter value at right of "PG SHIFT" on the
monitor. If the value is not changed for a long
time, tape error or ITI envelope lack may be
occurred.
Advertisement
Chapters
Table of Contents
