Table of Contents
Advertisement
5.6.38. RP Head Sensitivity Adjustment (50M Mode)
Specification
Mode
Test Point
Adjustment
Tape
1. Set the LISTA software in 50M Mode. Select AJ-D950 in the PC
menu and displays the main menu. 25M and 50m mode can be
changed by "0" key.
2. Set the VTR in Service Mode to open the service menu and select
the item of " A05 RP GAIN ED" in the "SERVO ADJUST" menu.
3. Playback a LISTA alignment tape (VFM3581KM).
4. Select the LISTA (6) ATF Error Signal Monitor and " 1.2% Speed..."
and type Enter to start the software.
5. When the picture is appeared as shown in figure adjust ATF Gain
so that the " Sens. Value:" is in the Specification. To return the
main menu press ESC key.
5.6.39. RP Head Sensitivity Detection (50M Mode)
Sensitivity 150+/-15 (mV/um)
Playback
(1) ATF:TP732 (2) HSW:TP722(RP HSW) (not TP723(PB HSW)
(3) GND:TG510
SERVO Adjustment Menu:"A09 RP GAIN P"
VFM3581KM or VFM3581KL
47
Advertisement
Chapters
Table of Contents
