Panasonic DVC PRO Studio AJ-D950P Service Manual page 63

2. After installation adjust the gap between brake pad and turn table.
(Refer to Supply Brake Solenoid Replacement and Adjustment.)
5.7.11. Pinch Solenoid Replacement
(Removal of Pinch Solenoid)
1. Remove the top panel.
2. Remove the front loading unit.
3. Remove the bottom panel.
4. Remove 2 screws (A) and remove the Pinch Solenoid Unit.
5. Remove 2 screws (B) and remove the Pinch Solenoid Angle.
6. Remove 2 screws (C) and remove pinch solenoid base then
remove Pinch Solenoid.
(Installation of Pinch Solenoid)
1. Install a new Pinch Solenoid as reverse order of its removal. After
installation Pinch Solenoid Position Adjustment is necessary.
(Refer to Pinch Solenoid Position Adjustment.)
5.7.12. Pinch Arm Unit Replacement
(Removal of Pinch Arm Unit)
Pinch Solenoid Removal
63