Panasonic DVC PRO Studio AJ-D950P Service Manual page 12

3. Remove 1 screw with the Power Supply unit on the VTR top side.
4. Remove 2 screws at VTR Rear panel which are used to fix the
Power supply unit.
5.3.7. Removal of Mechanism Unit
1. Remove the front loading unit.
2. Remove the connector P1 and P2 which are connected to mech
interface at VTR bottom.
Remove the A/C Head cable from the intermediate point, and remove the P5003 and P5002
which are connected between the cylinder unit and Head Buffer board. Then remove the 3
12