Table of Contents
Advertisement
.
3-6-33
RP Head Sensitivity Adjustment (25M Mode)
Specificatio
Sensitivity 150+/-15 (mV/um)
n
Mode
Playback
Test Point
(1) ATF:TP732 (2) HSW:TP722(RP HSW) (not TP723(PB HSW) (3) GND:TG510
Adjustment
SERVO Adjustment Menu:"A09 RP GAIN P"
Tape
VFM3581KM or VFM3581KL
Before this Adjustment adjust RFEQ (H3/H4) ENV Level Adjustment(L/R).
Set the LISTA software in 25M Mode. Select AJ-D950 in the PC menu and displays the main menu. 25M and 50m
mode can be changed by " 0" key.
1. Set the VTR in Service Mode to open the service menu and select the item of " A09 RP GAIN DP" in the
" SERVO ADJUST" menu.
2. Playback a LISTA alignment tape (VFM3581KM).
3. Select the LISTA (6) ATF Error Signal Monitor and " 1.2% Speed..." and type Enter to start the software.
4. When the picture is appeared as shown in figure adjust ATF Gain so that the " Sens. Value:" is in the
Specification. To return the main menu press ESC key.
Adjustment Value
Advertisement
Chapters
Table of Contents
