Table of Contents
Advertisement
2 no reply
3 not reachable
4 all call forwarding (refer 3GPP TS 22.030 [19])
5 all conditional call forwarding (refer 3GPP TS 22.030 [19])
<mode>:
0 disable
1 enable
2 query status
3 registration
4 erasure
<number>: string type phone number of forwarding address in format specified by <type>
<type>: type of address octet in integer format default 145 when dialling string includes
international access code character "+", otherwise 129
<subaddr>: string type subaddress of format specified by <satype>
<satype>: type of subaddress octet in integer format default 128
<classx> is a sum of integers each representing a class of information (default 7):
1 voice (telephony)
2 data (refers to all bearer services; with <mode>=2 this may refer only to some bearer
service if TA does not support values 16, 32, 64 and 128)
4 fax (facsimile services)
8 short message service
16 data circuit sync
32 data circuit async
64 dedicated packet access
128 dedicated PAD access
<time>:
1...30
call is forwarded, default value 20
<status>:
0 not active
1 active
6.2 Call waiting +CCWA
6.2.1 Command Syntax
Issue 18 (2009-06-22)
when "no reply" is enabled or queried, this gives the time in seconds to wait before
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 91 of 169
Advertisement
Table of Contents
