Enable Or Disable Ip Notification %Ipnotif; Command Syntax; Description; Defined Values - Huawei EM770W At Command Interface Specification

%IPQCPDPP: 16,0
OK
Command 3: AT%IPQCPDPP=1,1,"123456","abc"
Result 3:
OK
Command 4: AT%IPQCPDPP?
Result 4:
%IPQCPDPP: 1,1,"abc"
%IPQCPDPP: 2,0
......
%IPQCPDPP: 16,0
OK

13.15 Enable or disable IP notification %IPNOTIF

13.15.1 Command Syntax

Command
%IPNOTIF=<flag>
% IPNOTIF?
% IPNOTIF=?

13.15.2 Description

This command is used to enable or disable all IPSTack Terminal notification, by
default the notification is on, and the user can turn it off.
The value is written to profile.

13.15.3 Defined Values

< flag >: printing flag
Issue 18 (2009-06-22)
0 disable
1 enable
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>% IPNOTIF:<flag><CR><LF>
<CR><LF>% IPNOTIF:(range of < flag> )
<CR><LF><CR><LF>OK<CR><LF>
Page 144 of 169