Informative Examples - Huawei EM770W At Command Interface Specification

1-16: Index value of PDP setting environment. Other PDP-related commands can be
used for invoking the storage position through this index value.
<PDP_AUTH_type>: Authorization type(0-2)
0 None
1 PAP
2 CHAP In the mode only password is needed
<password>: String for authorization password
<username>: String for authorization username

13.14.4 Informative Examples

After executing the following commands consecutively, the results are as follows:
Command 1: AT%IPQCPDPP=?
Result 1:
%IPQCPDPP:(1-16),(0-2),,
OK
Command 2: AT%IPQCPDPP?
Result 2:
%IPQCPDPP: 1,0
%IPQCPDPP: 2,0
%IPQCPDPP: 3,0
%IPQCPDPP: 4,0
%IPQCPDPP: 5,0
%IPQCPDPP: 6,0
%IPQCPDPP: 7,0
%IPQCPDPP: 8,0
%IPQCPDPP: 9,0
%IPQCPDPP: 10,0
%IPQCPDPP: 11,0
%IPQCPDPP: 12,0
%IPQCPDPP: 13,0
%IPQCPDPP: 14,0
%IPQCPDPP: 15,0
Issue 18 (2009-06-22)
e.g. : AT%IPCGDCONT=1,2,PASSWORD
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 143 of 169