Tcp/Udp Service Interface Description; Initialize Ip Service %Ipinit; Command Syntax; Description - Huawei EM770W At Command Interface Specification

13

13.1 Initialize IP service %IPINIT

13.1.1 Command Syntax

Command
%IPINIT=<APN>[,<user_na
me>[,<password>]]
%IPINIT?
%IPINIT=?

13.1.2 Description

This command is used to initialize TCP/UDP connection, access ISP or establish
GPRS/UMTS network, in order to establish a physical connection. After initialization,
module gets a local IP, then to open TCP link or transfer UDP data.

13.1.3 Defined Values

<APN>: string type, (Access Point Name).
<user_name>: string type, user name, can be default
<password>: string type, password, can be default
<state>: initialization sign
<ip_address >: string type, local IP
< pri_dns_address>: string type,primary DNS IP
Issue 18 (2009-06-22)
TCP/UDP Service Interface
0 not initialized
1 initialized
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>ERROR<CR><LF>
<CR><LF>%IPINIT:<state>,<ip_address>,<APN>,<
pri_dns_address>,<sec_dns_address>,<CR><LF><
CR><LF>OK<CR><LF>
<CR><LF>%IPINIT:(list of supported <state>s)
<CR><LF><CR><LF>OK<CR><LF>
Description
Page 130 of 169