Description; Defined Values; Te2-Mt2 Fixed Data Rate +Ipr; Command Syntax - Huawei EM770W At Command Interface Specification

AT+ICF=?

3.31.2 Description

This extended-format compound parameter is used to determine the local serial port
start-stop (asynchronous) character framing that the MT2 shall use while accepting
TE2 command set and while transmitting information text and result codes to the TE2,
if this is not automatically determined (see +IPR).

3.31.3 Defined values

<format> valid numeric values
0: auto detect [NOT SUPPORTED]
1: 8Data 2Stop
2: 8Data 1Parity 1Stop
3: 8Data 1Stop (Default)
4: 7Data 2Stop
5: 7Data 1Parity 1Stop
6: 7Data 1Stop
<parity> defined numeric values
0: odd
1: even
2: Mark [NOT SUPPORTED]
3: space (Default)
Note: When using UART1 to do PS data service, sending the setting command of
+ICF will return ERROR.

3.32 TE2-MT2 Fixed Data Rate +IPR

3.32.1 command syntax

Command
Issue 18 (2009-06-22)
<CR><LF>+ICF: (list of supported
< format >s), (list of supported
<
parity>s)<CR><LF><CR><LF>OK<CR>
<LF>
Possible response(s)
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 47 of 169