Newly Received Message State Report +Cdsi; Command Syntax; Description; Defined Values - Huawei EM770W At Command Interface Specification

<fo>: First-Octet.
<pid>: Protocol-Identifier.
<dcs>: Data-Coding-Scheme.
<sca>: Service-Center-Address.
<tosca>: Type-of- Service-Center-Address.
<length>: length of user data.
<message in text>: user data.

5.5 Newly received message state report +CDSI

5.5.1 Command Syntax

Command

5.5.2 Description

Indicate that a new message state report is received, and specify the storage position.

5.5.3 Defined Values

<mem>: Currently, only "SR" is supported.
"SR"
<index>: Integer value, which indicates the position in the storage.
5.6 Indication of new message state report reported
directly +CDS
5.6.1 Command Syntax
Command
5.6.2 Description
Received new messages are not stored, but reported to TE directly.
Issue 18 (2009-06-22)
Possible response(s)
<CR><LF>+CDSI: <mem>,<index><CR><LF>
(U)SIM message storage
Possible response(s)
if pdu mode (+CMGF=0):
<CR><LF>+CDS: <length><CR><LF><pdu><CR><LF>
if text mode (+CMGF=1):
<CR><LF>+CDS:
<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st><CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 60 of 169