Table of Contents
Advertisement
9
9.1 PDP environment setting command +CGDCONT
9.1.1 Command Syntax
Command
+CGDCONT=<cid>[,<PDP_
type>[,<APN>[,<PDP_addr
>[,<d_comp>[,<h_comp>]]]]
]
+CGDCONT?
+CGDCONT=?
9.1.2 Description
A group of setting environments indexed by <cid> are stored locally. Each stored
setting environment contains a group of parameters related to PDP. The SET
command stores a group of PDP-related parameters to the setting environment
indexed by <cid>. Initially, each setting environment is not defined. After a group of
parameters are stored via the SET command, the setting environment enters the
"defined" state. The number of defined setting environments that can be stored
depends on the value range of <cid>.
A special SET command "+CGDCONT= <cid>" will clear all parameters in the setting
environment indicated by <cid>.
Issue 18 (2009-06-22)
Data Service Interface Description
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>+CGDCONT:
<APN>,<PDP_addr>,
<h_comp>[<CR><LF>+CGDCONT:
<PDP_type>,
<APN>,<PDP_addr>,
<h_comp>[...]]<CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CGDCONT:
<cid>s),
<PDP_type>,,,(list
<d_comp>s),(list of supported <h_comp>s)
[<CR><LF>+CGDCONT:
<cid>s),
<PDP_type>,,,(list
<d_comp>s),
(list
<h_comp>s)[...]]<CR><LF><CR><LF>OK<CR><LF>
<cid>,
<PDP_type>,
<d_comp>,
<d_comp>,
(range
of
supported
of
supported
(range
of
supported
of
supported
of
supported
Page 105 of 169
<cid>,
Advertisement
Table of Contents
