Defined Values; Indication Of New Message Reported Directly +Cmt; Command Syntax; Description - Huawei EM770W At Command Interface Specification

5.3.3 Defined Values

<mem>: Currently, "SM", "ME" and "SR" are supported.
"BM"
"ME"
"MT"
"SM"
"TA"
"SR"
<index>: Integer value, which indicates the position in the storage.
5.4 Indication of new message reported directly
+CMT

5.4.1 Command Syntax

Command

5.4.2 Description

Received new messages are not stored, but reported to TE directly.

5.4.3 Defined Values

<reserved>: Reserved.
PDU mode:
<length>: Integer value, which indicates the number of bytes of PDU data.
<pdu>: Protocol data unit. Its format is the same as defined in section "Message list
command".
text mode:
<oa>: Originating-Address.
<scts>: Service-Centre-Time-Stamp.
<tooa>: Type-of-Originating-Address.
Issue 18 (2009-06-22)
Broadcast message storage
ME message storage
ME-associated storage
(U)SIM message storage
TA message storage
State report storage
Possible response(s)
if pdu mode (+CMGF=0):
<CR><LF>+CMT:
[<reserved>],<length><CR><LF><pdu><CR><LF>
if text mode (+CMGF=1):
<CR><LF>+CMT:<oa>,[<reserved>],<scts>,[<tooa>,<fo>,<pi
d>,<dcs>,<sca>,<tosca>,<length>]<CR><LF><message
text><CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
in
Page 59 of 169