Description; Defined Values - Huawei EM770W At Command Interface Specification

Command
%HS=<id>,<action>

3.17.2 Description

This command is used to shake hand between MS and TE.

3.17.3 Defined values

<id>: 8 digits, used to recognize MS.
<action>: represent the action type of TE.
0: TE is living
1: TE is stopped
<protocol>:
0: Module is running at APP
1: Module is running at BOOT
<is_offline>:
0: online
1: offline
2: LPM
<product_class>: product class
0: GSM/WCDMA
1: CDMA 1X ONLY
2: CDMA + EVDO SUPPORT
<product_id>: product id
6: EM770W
<software_id>: reserved
Issue 18 (2009-06-22)
Possible response(s)
<CR><LF>%HS:<id>,<protocol>,<is_offline>,<product_c
lass>,<product_id>,[<software_id>]<CR><LF><CR><LF
>OK<CR><LF>
indicate the protocol state of the module
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 36 of 169