Table of Contents
Advertisement
45 (SYS_BAND_GSM_PGSM_900)
47 (SYS_BAND_GSM_DCS_1800)
48 (SYS_BAND_GSM_PCS_1900)
80 (SYS_BAND_WCDMA_I_IMT_2000)
81 (SYS_BAND_WCDMA_II_PCS_1900) WCDMA PCS 1900
84 (SYS_BAND_WCDMA_V_850)
87 (SYS_BAND_WCDMA_VIII_900)
< srv_nodeB_PLMN > and < srv_nodeB_BS >: Information of base station the
wireless module maintained.
0~255: Base station ID.
Note: It only supports to query base station information at GSM mode now, and
returns 0,0 at WCDMA mode.
<srv_cell_stat >: Serving cell state.
0: Indicates not register on serving cell currently.
1: Indicates register on serving cell currently.
<srv_psc>: Serving cell primary scrambling code.
0~65535: Serving cell primary scrambling code.
Note: It returns primary scrambling code at WCDMA mode but cell id at GSM mode.
<ecio>: Returns the Ec/Io value. It is a negtive.
Note: It only supports to query base station information at WCDMA mode now, and
returns 0 at GSM mode.
<rscp>: Received Signal Code Power. Returns the RSCP value. It is a negtive.
Note: It only supports to query base station information at WCDMA mode now, and
returns 0 at GSM mode.
<lac>: Location area code, the value displays hexadecimal.
<cell_id>: Cell ID, the value displays hexadecimal.
<neighbour:_cell_num>: Number of neighbour cells. It equals 0 means cannot get any
neighbour cell, maybe because of the network environment
0~6: It supports to maintain six neighbour cells at most.
<neig_psc1>...<neig_psc6>: Primary scrambling code of neighbour cells.
0~65535: Primary scrambling code of neighbour cells.
Note: It returns primary scrambling code at WCDMA mode but cell id at GSM mode.
3.23 Module delay resetting %RESET
3.23.1 Command Syntax
Issue 18 (2009-06-22)
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Primary GSM 900
GSM DCS systems
GSM PCS
WCDMA IMT 2000
WCDMA 850
WCDMA 900
Page 40 of 169
Advertisement
Table of Contents
