Description; Defined Values - Huawei EM770W At Command Interface Specification

inde
x
0
1
2
3
5
6
7
11
12

14.3.2 Description

After user knowing about the information of STK card via %STIN, can send module
this command to get the detail data of STK card.
The query command used to get the command type and index of %STIN
The test command used to get the support list of STK card.

14.3.3 Defined Values

<CmdType>: command type.
Issue 18 (2009-06-22)
Command Type Possible response(s)
Setup Menu %STGI: <Id>, <Nbltems>, <Alpha Identifier menu>
%STGI :<Id1>,<Nbltems>,<Alpha Id1 Label>,<Help
Info> [,<NextActionld>]<CR><LF>
%STGI: <Id2>, <Nbltems>, <Alpha Id2 Label>,
<Help Info>[,<NextActionld>]<CR><LF>[...]
Display Text %STGI:<TextInfo>,<TextFormat>,<ClearMode>[,<D
urationTime>]
Get Inkey %STGI:
<HelpInfo>[,<Timeout>[,Icon]]
Get Input %STGI:
<PackMode>,
<SizeMax>,
textCode >]
PLAY TONE %STGI:<ToneType>[,<
textCode >, <icon>]
Sel Item %STGI: <DefaultItem>, <NbItems>, <Alpha Identifier
menu><CR><LF>
%STGI: <Id1>, <NbItems>, <Alpha Id1 Label>,
<Help Info>[,<NextActionld>]<CR><LF>
%STGI: <Id2>, <NbItems>, <Alpha Id2 Label>,
<Help Info>[,<NextActionld>]<CR><LF>
[...]
Refresh %STGI:<Refresh Type>[,<File List>]
LAUNCH %STGI:< URL >,<LaunchMode>
BROWSER
SET UP IDLE %STGI:<TextInfo>,<textCode>[,<icon>]
MODE TEXT
0 STK card has already sent a 'Setup Menu' command
1 STK card has already sent a 'Display Text' command
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
<TextInfo>,<textCode>,<rspFormat>,
<TextInfo>,<textCode>,<rspFormat>,
<EchoMode>,
<HelpInfo> [,<DefaultTextInfo>,<
Duration
<SizeMin>,
>,<TextInfo>,<
Page 147 of 169