Table of Contents
Advertisement
The class of message is given by the TP-DCS domain of the message. For details,
see the DCS parameter description of the "+CMGS" command.
+CMT & +CNMA means requiring TE to send a confirmation (+CNMA).
<bm>: For use of setting the cell broadcast information. It is not supported currently.
<ds>: For use of setting the message acknowledgement.
0
1
acknowledgement directly to TE.
+CDS: <length><CR><LF><pdu>
2
notification will be sent to the TE via "+CDSI".
+CDSI: <mem>,<index>
<bfr>: For use of setting buffer processing after transition from <mode>=0 to
<mode>=1, 2.
0
to the TE at a time.
1
emptied.
5.7.4 Informative Examples
1. Set CNMI=1,4,0,0,0.(default)
It indicates that the new class1 messages will be stored in the MS first, and report
user by the following special format:
Received SMS:
01/23/09, 11:22:38
Orig Address: +8613801000722
Call back Address: +8613801000722
User Data: testing
Note: If keeping CNMI as the default value, while embedded TCP connection, the
module can inform server the process status via SMS.
2. For example, set CNMI=1,1,0,1,0.
It indicates that the new class1 messages will be stored in the MS first, and the
storage position will be reported (+CMTI: ME,1}; the message state reports will be
reported directly (+CDS: ).
When it is impossible to report the message notification (e.g. when in the online data
mode), the message notification will be discarded.
5.8 Delete Message +CMGD
Issue 18 (2009-06-22)
Do not send message acknowledgement to the TE.
Do not store message acknowledgement in MS, route message
If the message acknowledgement is stored in the MS, a storage position
After entering the <mode>1-2, the buffered unsolicited result codes will be sent
After entering the <mode>1-2, the buffered unsolicited result codes will be
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 65 of 169
Advertisement
Table of Contents
