Supplementary Service Commands; Call Forwarding Number And Conditions +Ccfc; Command Syntax; Description - Huawei EM770W At Command Interface Specification

6

6.1 Call forwarding number and conditions +CCFC

6.1.1 Command Syntax

Command
+CCFC=<reaso
n>,<mode>
[,<number>[,<ty
pe>
[,<class>
[,<reserved1>[,<
reserved2>
[,<time>]]]]]]
+CCFC=?

6.1.2 Description

This command allows control of the call forwarding supplementary service.
Registration, erasure, activation, deactivation, and status query are supported. When
querying the status of a network service (<mode>=2) the response line for 'not active'
case (<status>=0) should be returned only if service is not active for any <class>.
Test command returns reason values supported as a compound value.

6.1.3 Defined Values

<reason>:
0 unconditional
1 mobile busy
Issue 18 (2009-06-22)

Supplementary service commands

Possible response(s)
When <mode>=2
<CR><LF>+CCFC: <status>,<class1>[,<number>,<type>
[,<reserved1>,<reserved2>[,<time>]]][
<CR><LF>+CCFC: <status>,<class2>[,<number>,<type>
[,<reserved1>,<reserved2>[,<time>]]]
[...]]<CR><LF><CR><LF>OK<CR><LF>
When <mode>2
<CR><LF>OK<CR><LF>
or
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+CCFC:
<reason>s)<CR><LF><CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
(list of supported
Page 90 of 169