System Setting Interface Description; Rssi Change Indication %Rssi; Command Syntax; Description - Huawei EM770W At Command Interface Specification

11.1 RSSI change indication %RSSI

11.1.1 Command Syntax

Command

11.1.2 Description

When the change of RSSI is more than 5dBm, the MS will report this indication to the
TE.

11.1.3 Defined Values

<rssi>: Strength of the receiving signal. The values are defined as follows:
0
1
2...30
31 Equal to or higher than -51 dBm
99 Unknown or unmeasurable.

11.2 Unsolicited report control command %CURC

11.2.1 Command Syntax

Command
%CURC=<mode>
Issue 18 (2009-06-22)
11
Possible response(s)
<CR><LF>%RSSI: <rssi><CR><LF>
Equal to or less than -113 dBm
-111 dBm
-109... -53 dBm
Possible response(s)
<CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
System Setting Interface
Description
Page 117 of 169