Defined Values; Manufacturer Information Query Command +Cgmi; Command Syntax; Description - Huawei EM770W At Command Interface Specification

The READ command is used to return the current mode.
The TEST command is used to return the supported parameter values.

3.10.3 Defined Values

<fun>:
0
1
4
5
6
7
<rst>: Whether to restart MS before setting (currently not supported)
NOTE: at+cfun without config value will set as LPM (low power consumption) mode.
3.11 Manufacturer information query command
+CGMI

3.11.1 Command Syntax

Command
+CGMI
+CGMI=?

3.11.2 Description

This command is used to query the manufacturer information.

3.11.3 Defined Value

<manufacturer>: Manufacturer information. Its value is a string.

3.11.4 Informative Examples

AT+CGMI
huawei
3.12 Software version number query command
+CGMR
Issue 18 (2009-06-22)
Set as LPM (low power consumption) mode (previous mode must not be offline)
Set as online mode (default value) (previous mode must not be offline)
Set as offline mode (previous mode must not be FTM)
Set as offline FTM (previous mode must be online)
Reset MS (previous mode must be offline)
Set as RFoff mode (about radio frequency)
Possible response(s)
<CR><LF><manufacturer><CR><LF><CR><LF>OK<CR
><LF>
<CR><LF>OK<CR><LF>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 32 of 169