Description; Defined Values - Huawei EM770W At Command Interface Specification

+CGEQNEG=?

9.5.2 Description

This command allows the TE to retrieve the negotiated QoS profiles returned in the
Activate PDP Context Accept message.
The execution command returns the negotiated QoS profile for the specified context
identifiers, <cid>s. The QoS profile consists of a number of parameters, each of
which may have a separate value.
The test command returns a list of <cid>s associated with active contexts.

9.5.3 Defined values

<cid>: a numeric parameter which specifies a particular PDP context definition (see
+CGDCONT commands),the value range is 1 to 16.
<Traffic class>: a numeric parameter that indicates the type of application for
which the UMTS bearer service is optimised.
0 - conversational
1 - streaming
2 - interactive
3 - background
Other values are reserved.
<Maximum bitrate UL>: a numeric parameter that indicates the maximum number
of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an example a bitrate of
32kbit/s would be specified as '32' (e.g. +CGEQNEG:...,32, ...)
<Maximum bitrate DL>: a numeric parameter that indicates the maximum number
of kbits/s delivered by UMTS (down-link traffic) at a SAP As an example a bitrate of
32kbit/s would be specified as '32' (e.g. +CGEQNEG:...,32, ...)
<Guaranteed bitrate UL>: a numeric parameter that indicates the guaranteed
number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided that there is
data to deliver). As an example a bitrate of 32kbit/s would be specified as '32' (e.g.
+CGEQNEG:...,32, ...)
<Guaranteed bitrate DL>: a numeric parameter that indicates the guaranteed
number of kbits/s delivered by UMTS (down-link traffic) at a SAP (provided that there
is data to deliver). As an example a bitrate of 32kbit/s would be specified as '32' (e.g.
+CGEQNEG:...,32, ...)
<Delivery order>: a numeric parameter that indicates whether the UMTS bearer
shall provide in-sequence SDU delivery or not.
0 - no
1 - yes
Other values are reserved.
<Maximum SDU size>: a numeric parameter that (1,2,3,...) indicates the maximum
allowed SDU size in octets
Issue 18 (2009-06-22)
+CGEQNEG: (list of <cid>s associated with active contexts)
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 111 of 169