Huawei USG6000 Series Hardware Manual page 98

HUAWEI USG6000 Series
Hardware Guide
Name
MGMT port
Console port
(RJ45)
USB0 and
USB1 ports
0 to 7 (RJ45)
NOTE
8 to 11 (SFP)
NOTE
Indicators
Issue 08 (2017-06-30)
Description
Out-of-band 10/100/1000M RJ45 autosensing Ethernet management
port. The interface number is GigabitEthernet 0/0/0 and the default IP
address of the interface is 192.168.0.1.
You can connect this port to the network port or any reachable port on a
PC through a network cable. Then, you can use Telnet to access the CLI
or use a web browser to access the web UI to configure, manage, and
maintain the USG.
NOTE
The MGMT port cannot be used as a service port.
Console ports allow you to locally connect a PC to the device. You can
use a console cable to connect the console port (RJ45) on the device to
the COM port on your PC and use a serial port terminal program on
your PC to access, configure, and manage the device.
USB ports allow you to insert USB devices for system software
upgrades. For details on upgrades through USB devices, refer to the
Upgrade Guide delivered with the device.
Service ports. They are eight 10/100/1000M autosensing Ethernet
electrical ports numbered from GigabitEthernet 1/0/0 to
GigabitEthernet 1/0/7.
Arrowheads
show the
positions of
ports. A down
arrowhead
indicates a port
at the bottom,
and an up
arrowhead
indicates a port
at the top.
Service ports. They are four GE optical ports numbered from
GigabitEthernet 1/0/8 to GigabitEthernet 1/0/11. Each port requires a
Gigabit Optical
Arrowheads
show the
positions of
ports. A down
arrowhead
indicates a port
at the bottom,
and an up
arrowhead
indicates a port
at the top.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Transceiver.
2 Hardware Overview
84