Huawei USG6000 Series Hardware Manual page 349

HUAWEI USG6000 Series
Hardware Guide
l
----End
Follow-up Procedure
After the USG is powered on, you can log in to the configuration page for management and
maintenance. For details, refer to the Administrator Guide.
Issue 08 (2017-06-30)
Power off the USG.
NOTICE
Before powering off the USG, ensure that configuration data is saved. Otherwise, the
configuration data may be lost.
If the USG will be administratively shut down for a long time, turn off the power switch.
After powering off the USG, set it aside properly according to storage requirements.
CAUTION
If the USG has hard disks, do not power off the USG by removing the power cable or
switching off the power supply to prevent data loss and hard disk damage. You must run
the disk offline command in the system view first and wait for about 30 seconds. After
the system prompts you with a message indicating that hard disks have stopped, turn off
the power switch of the USG.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
335