Huawei USG6000 Series Hardware Manual page 286

HUAWEI USG6000 Series
Hardware Guide
Step 3 Mount the USG in the cabinet.
1.
2.
3.
Issue 08 (2017-06-30)
Use a Phillips screwdriver to fix M6 screws into two floating nuts of the lower row but
do not secure them, leaving a 2 mm spacing, as shown in
Figure 3-24 Installing M6 screws to the cabinet
Lift the USG, move it to the cabinet, and hang the mounting ears onto the protruding M6
screws.
Use a Phillips screwdriver to secure the M6 screws, install M6 screws for the upper row,
and fix the USG into the cabinet through mounting ears, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
m
2 m
Front
M6
3 Hardware Installation
3-24.
Rear
Figure 3-25.
272