Huawei USG6000 Series Hardware Manual page 338

HUAWEI USG6000 Series
Hardware Guide
l
For details on the login through the console port, refer to the Administrator Guide.
Issue 08 (2017-06-30)
Parity: None
n
Stop bit: 1
n
Data flow control: None
n
c. Click OK. The copyright information is displayed on the HyperTerminal. You can
enter default user name admin and password Admin@123, modify the default
password as prompted to log in to the USG CLI.
Windows 7
Windows 7 does not include HyperTerminal like Windows XP did. However, you can
download a HyperTerminal program, such as PuTTY, for free from the Internet. PuTTY
is used as an example to describe the HyperTerminal configuration.
a. Download the PuTTY software to the local device and double-click it to run the
software.
b. Choose Session set the Connection type to Serial.
c. Set the PuTTY parameters.
Figure 3-70 Setting the PuTTY parameters for connecting the serial port to the
USG
d. Click Open. The copyright information is displayed on the HyperTerminal. You can
enter default user name admin and password Admin@123, modify the default
password as prompted to log in to the USG CLI.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
324