Usg6390E; Device Overview - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Series
Hardware Guide
Item
NOTE

2.1.9 USG6390E

The USG6390E has only AC models and no DC models and provides one power module and
fixed ports by default. However, optional modules, such as an additional power module, hard
disks, and expansion cards, are supported.

2.1.9.1 Device Overview

The USG6390E uses an integrated chassis that contains the fixed interface board, power
module, and fan module. You can also add some optional modules, such as hard disks,
additional power module, and expansion cards, to improve system reliability and add more
ports.
Appearance
Figure 2-39
Figure 2-39 Appearance of USG6390E
Front view
Secospace USG6000
Rear view
SM-HDD-SAS300G-B
Hard disk combination (optional)
Issue 08 (2017-06-30)
l a. The width does not include the size of mounting ears.
l b. The height is 1 U (1 U = 1.75 inches, or about 44.45 mm), which is a height unit defined in
International Electrotechnical Commission (IEC) 60297 standards.
l c. Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the rack when
no protection plate exists before or after the rack.
l d. The short term operating conditions mean that the continuous operating period does not exceed 48
hours and the accumulative total period within a year does not exceed 15 days. If the continuous
operating period exceeds 48 hours or the total period within a year exceeds 15 days, it is regarded as
long term.
l e. The ambient temperature change rate of a device with hard disk(s) is less than or equal to 20°C
per hour.
illustrates the appearance of the USG6390E.
SYS PWR MGMT
0 1
MGMT
2
0/1
ALM HDD MODE
3
1
0
RST
CONSOLE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
2 3 4 5 6 7 8 9 10 11
Fixed interface board
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Power module
2 Hardware Overview
Expansion slots
INPUT OUTPUT
ON
OFF
~100-240V;50/60Hz;2.5A
Slot for optional
power module
Secospace USG6000
4 HDD 5 PWR 6 PWR
79