Huawei USG6000 Series Hardware Manual page 176

HUAWEI USG6000 Series
Hardware Guide
Name
HDD0 or HDD1
HDD0 or HDD1 hard
disk alarm indicator (red)
HDD0 or HDD1 hard
disk run indicator (green)
USB Ports and indicators
USB0 and USB1 ports
USB0 or USB1 port
indicator (green)
Console Ports and Indicators
Console port (RJ45)
Issue 08 (2017-06-30)
Description
Hard disk slot, supporting one SM-HDD-SAS300G-A or SM-
HDD-SAS600G-A hard disk. The hard disks are optional. You
can purchase one or two hard disks from Huawei if needed. To
ensure hard disk data reliability, you are advised to purchase
two hard disks with the same capacity to create RAID1 for data
backup. For details, see
SAS300G-A,
and 2.5.3 Hard Disk Unit
NOTICE
l Ensure that two hard disks with the same capacity are used for
creating RAID. Otherwise, creating RAID fails.
l The FW starts to support SM-HDD-SAS600G-A hard disks since
V500R001C20SPC200. If you use SM-HDD-SAS600G-A hard
disks on earlier versions, the SM-HDD-SAS600G-A hard disks
will be identified as non-Huawei hard disks. You need to upgrade
the FW version.
l The USG starts to support SM-HDD-SAS1200G-A hard disk since
V500R001C50. If you use SM-HDD-SAS1200G-A hard disk on
earlier versions, the SM-HDD-SAS1200G-A hard disk will be
identified as non-Huawei hard disks. You need to upgrade the
software version.
l Steady on: HDD0 or HDD1 hard disk fails.
l Off: HDD0 or HDD1 hard disk is running normally.
l Steady on: HDD0 or HDD1 hard disk is present.
l Blink: HDD0 or HDD1 hard disk is reading or writing data.
l Off: HDD0 or HDD1 hard disk is not detected.
USB ports allow you to insert USB devices for system
software upgrades. For details, refer to the Upgrade Guide
delivered with the device.
l Steady on: USB0 or USB1 is connected.
l Off: USB0 or USB1 is not connected.
Console ports allow you to locally connect to the device. The
RJ45 and mini USB console ports cannot be used
simultaneously. If both console ports are connected, only the
mini USB console port can be used.
l You can use a mini-USB-to-USB cable to connect the mini
USB console port on the device to the USB port on your PC
and use a serial port terminal program on your PC to
access, configure, and manage the device.
l You can use a console cable to connect the console port
(RJ45) on the device to the COM port on your PC and use a
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.5.1 Hard Disk Unit SM-HDD-
2.5.2 Hard Disk Unit SM-HDD-SAS600G-A
SM-HDD-SAS1200G-A.
2 Hardware Overview
162