Huawei USG6000 Series Hardware Manual page 399

HUAWEI USG6000 Series
Hardware Guide
Figure A-17 LC/PC-LC/PC multi-mode optical fiber
l To ensure the normal transmission of optical signals, do not use single-mode optical fibers
l To connect extension optical fibers, purchase LC/PC-LC/PC adapters.
Optical fibers have multiple types of connectors. Common connectors are LC/PC, SC/PC, and
FC/PC.
l
l
l
Issue 08 (2017-06-30)
NOTICE
to connect multi-mode optical modules or multi-mode optical fibers to connect single-
mode optical modules.
LC/PC connector
The procedure and precautions for inserting and removing LC/PC connectors are as
follows:
– Insert and remove the connector along the axis without rotating the connector.
– When you insert the fiber, carefully insert the fiber head to the optical interface on
the interface board.
– To remove the optical fiber, press the pinch on the fiber connector, slightly push the
fiber connector and then pull it out.
SC/PC connector
The procedure and precautions for inserting and removing SC/PC connectors are as
follows:
– Insert and remove the connector along the axis without rotating the connector.
– When you insert the fiber, carefully insert the fiber head to the optical interface on
the interface board.
– To remove the optical fiber, slightly push the fiber connector, and pull out the
connector.
FC/PC connector
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Appendix
385