Installing A 3 U Device (Usg6650/6660/6670/6680); Mounting A Device In A Cabinet - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Series
Hardware Guide
----End
Follow-up Procedure
After the USG is powered on, you can log in to the configuration page for management and
maintenance. For details, refer to the Administrator Guide.

3.5 Installing a 3 U Device (USG6650/6660/6670/6680)

This chapter provides the cabinet-mounting, workbench-mounting, cable connection, and
expansion card installation methods of the USG6650/6660/6670/6680 series.

3.5.1 Mounting a Device in a Cabinet

The USG6650/6660/6670/6680 can be mounted in a 19-inch standard cabinet through L-
shape guide rails or adjustable guide rails.
Context
The adjustable guide rails (parts 21241561 and 21242247) and L-shaped guide rails are
optional and not delivered with the USG by default. Purchase them as required.
Required instruments:
l
l
Before installing the USG, check the following items:
l
l
Issue 08 (2017-06-30)
NOTICE
Before powering off the USG, ensure that configuration data is saved. Otherwise, the
configuration data may be lost.
If the USG will be administratively shut down for a long time, turn off the power switch.
After powering off the USG, set it aside properly according to storage requirements.
CAUTION
If the USG has hard disks, do not power off the USG by removing the power cable or
switching off the power supply to prevent data loss and hard disk damage. You must run
the disk offline command in the system view first and wait for about 30 seconds. After
the system prompts you with a message indicating that hard disks have stopped, turn off
the power switch of the USG.
Phillips screwdriver
Floating mounting bar
The cabinet is stable.
Adjustable guide rail 21241561 can be flexibly adjusted from 400 mm to 600 mm in
length and adjustable guide rail 21242247 from 370 mm to 585 mm to be installed in a
600 mm to 800 mm deep cabinet. Before installing the adjustable guide rail, adjust the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
307