Huawei USG6000 Series Hardware Manual page 171

HUAWEI USG6000 Series
Hardware Guide
Figure 2-73 USG6650/6660 front panel
Slot numbering layout
Name
Slot numbering
2XG8GE
expansion card
(in slot 1)
8GEF expansion
card (in slot 2)
Expansion slot
Issue 08 (2017-06-30)
1 2
3 4
5 6
7 8
2XG8GE expansion card
Secospace USG6000
2XG8GE
0 1 2 3
1 2
3 4
5 6
7 8
Protective ground terminal
ESD jack
ESN
Description
Indicates the slot numbering layout. Slots 1 through 4 are WSIC slots,
and slots 5 through 8 are XSIC slots.
Interfaces are numbered in the format of "interface type A/B/C", where:
l A is the slot number of the interface card. The slot number is the
number described in this row. When a WSIC is installed in the lower
part of an XSIC slot, the slot number of the WSIC is the XSIC slot
number.
l B is the daughter card number, which is 0 because no daughter card
is installed now.
l C is the interface number, which begins with 0 and is numbered
from bottom to top and left to right.
The 2XG8GE card is mandatory and provides eight gigabit RJ45
Ethernet ports and two 10-gigabit SFP+ ports. The interfaces on the
interface card are numbered from GigabitEthernet 1/0/0 to
GigabitEthernet 1/0/9 (left to right). For details on the 2XG8GE
interface card, see
The 8GEF interface card is mandatory and provides eight GE SFP
ports. The interfaces on the interface card are numbered from
GigabitEthernet 2/0/0 to GigabitEthernet 2/0/7 (left to right). For details
on the interface card, see
Provides two WSIC slots and four XSIC slots. When a WSIC is
installed in the lower part of an XSIC slot, install a filler panel on the
empty upper part of the slot to ensure a normal air flow and keep out
dust.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
0 1
1
0
8GEF
4 5 6 7
10G
2.4.2 2XG8GE WSIC Interface
2.4.3 8GEF WSIC Interface
2 Hardware Overview
8GEF expansion card
0 1 2 3 4
5
1 3
4
0 2
Expansion slots
Card.
Card.
5 6 7
7
6
157