Huawei USG6000 Series Hardware Manual page 241

HUAWEI USG6000 Series
Hardware Guide
Name
Indicator 0-1 (green)
Indicator 2-3 (green)
Port Description
Table 2-93
Table 2-93 Attributes of ports on the 4GE-BYPASS card
Attribute
Connector type
Cable
Working mode
Rate
Port standard
Frame format
Network protocol
Technical Specifications
Table 2-94
Issue 08 (2017-06-30)
Description
Status indicator of the Layer-2 bypass link formed by GE0 and
GE1
l Steady on: The card is powered on. The bypass formed by
GE0 and GE1 is in protection state.
l Blink: The card is powered on. The bypass formed by GE0
and GE1 is in working state.
l Off: The card is powered off. The bypass formed by GE0
and GE1 is in protection state.
Status indicator of the Layer-2 bypass link formed by GE2 and
GE3
l Steady on: The card is powered on. The bypass formed by
GE2 and GE3 is in protection state.
l Blink: The card is powered on. The bypass formed by GE2
and GE3 is in working state.
l Off: The card is powered off. The bypass formed by GE2
and GE3 is in protection state.
lists the attributes of ports on the 4GE-BYPASS card.
Description
RJ45
Standard Ethernet cable
Full-duplex/Half-duplex
10/100/1000 Mbit/s autosensing
IEEE 802.2/802.3
Ethernet_II
TCP/IP
lists the technical specifications of the 4GE-BYPASS card.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Overview
227