Parameter Window A: Status Messages - ABB i-bus KNX Product Manual


ABB i-bus KNX
Start-up
3.2.6.2

Parameter window A: Status messages

Settings for the status messages and their send reaction are undertaken in this parameter window.
Enable communication object
"Status Open-Closed/On-Off" 1 bit
Options:

Yes: The communication object Status Open-Closed/On-Off is enabled. The following parameter
appears:
Enable communication object
"Status Operability" 1 bit
Options:
This function is particularly suitable to indicate to the user via an LED that the output cannot currently be
operated via the direct communication ibjects (e.g. UP, DOWN...).

Yes: The communication object Status Operability is enabled. The following parameter appears:
Yes
No
Send object value
Options: No, update only
On change
On request
On change or on request

No, only update: The status is updated but not sent (the status can be read via the
communication object).

On change: The status is sent when a change occurs.

On request: The status is sent when a request occurs.

On change or on request: The status is sent on a change or a request.
Yes
No
Operation is blocked if

a safety function was activated, e.g. Weather alarm, Disable or Forced operation

manual operation is active
JRA/S | 2CDC 506 051 D0204 93